Magnatrol Type “A” Full Port Bronze Solenoid Valve
The “A” type Full Port is a normally closed bronze solenoid valve with ½” to 3” pipe sizes. The maximum fluid temperature is 212°F, and the maximum static pressure is 300 PSI.
These solenoid valves are designed to control the flow of water, oil, air, gas, solvents, brine, and vacuum. They can operate effectively within a differential pressure range specified in the catalog. The valve must be mounted in a horizontal pipe with a solenoid enclosure vertical and on top.
Operation
The A Full Port solenoid valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston relieving the pressure above the piston, which is then lifted from its seat by the plunger. After de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it.
Construction
(* Wetted parts)
*Valve Body - Cast Bronze, Globe Pattern - NPT ends
*Piston - Bronze
Coil Enclosure - Malleable or Cast Iron, 1/2” NPS conduit conn.
*Plunger - 430 Stainless Steel
*Pilot Valve - 303 Stainless Steel
*Bonnet Tube - 304 Stainless Steel
*Spring - 302 Stainless Steel
*Body Seal - Buna-N or Non-Asbestos Gasket
*Orifice Seal - Buna-N (Viton or Glass Filled PTFE available)
*AC Shading Coil - Copper
*Stem Pin - Inconel
Coil - Encapsulated Class B, 18” leads - (Class H available)
HVH Industrial Solutions is a distributor of Magnatrol Valve Corp.
We work closely with the Magnatrol Valve team to provide superior customer service and engineering support.
If you have any questions write us via live chat, (one of our team members will answer your questions), give us a call, or send us a quote request. The HVH team is always ready to help you.
1(866)577-4040
or
Request a quote