Stieber Clutch Built-In Freewheels Type AE

Type AE is a roller-type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. The nominal outside diameter is a standard ball-bearing dimension.

A typical arrangement is to install this type beside a bearing with the same housing diameter tolerance as shown on the following page.

The inner race is keyed to the shaft. The outer race has an h6 tolerance and should be fitted in a housing with a K7 tolerance. Additional side notches provide for positive torque transmission.

If the housing tolerance is to R6, the use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of the inner and outer race of ± S/2.

Check the Clutch Built-In Freewheels Type AE Catalog to select the best model for your application.

HVH Industrial works with manufacturers' specialized engineering teams to meet our customer's requirements and the highest quality standards. 

If you have any questions, write us via live chat (one of our team members will answer your questions), call, or send us a quote request. The HVH team is always ready to help you.

1(866)577-4040

or